A starter ring gear is a part attached to an internal combustion engine that is part of the assembly which transfers the torque from the starter motor...

releases the starter switch, a spring retracts the pole shoe, which pulls the starter drive out of engagement with the ring gear. This starter was used on...

(180 m/s)) shoots down the pipe, forcing the motor to spin and engage the starter ring gear on the engine, which is attached to the crankshaft. Shotgun starters...

battery to the starter motor proper. All modern cars also use the starter solenoid to move the starter pinion into engagement with the ring gear of the engine...

typically used as starting-aid devices, when the engine is being cranked by a starter motor, and in most cases switched off when the engine has reached a defined...

butterfly valve throttle spindle/shaft gear and the sensor & signal processing circuit board is mounted within the ETC gear box cover and is stationary. When...

Since the carrier ring used in constant seating stress gaskets take this deflection into account when creating the carrier ring for a given flange size...

An O-ring, also known as a packing or a toric joint, is a mechanical gasket in the shape of a torus; it is a loop of elastomer with a round cross-section...

different gear ratios is designed to make satisfactory power available over the full range of vehicle speeds. The goal of the selection of gear ratios is...

operate on this lower voltage. But once the vehicle was started and the starter disengaged, the normal operating voltage was too high for the ignition...