A Pressurized Mating Adapter (PMA) is a spacecraft adapter used on the International Space Station (ISS) to convert a Common Berthing Mechanism (CBM) interface...

first component of the USOS pressurized segment is the Unity. On the aft end of Unity is the Pressurized Mating Adapter (PMA) 1. The PMA-1 connects Unity...

delivered to the ISS starting in 2016. Each of two existing Pressurized Mating Adapters has an IDA permanently attached, so the former PMA function is...

Aboard the ISS, the Expedition 28 crew completed the pressurization of Pressurized Mating Adapter (PMA-2), located at the forward docking port of the Harmony...

two open Pressurized Mating Adapters (PMAs), both of which are connected to the Harmony module. Prior to IDA several different docking adapters were designed...

is a sublayer of physical layer Program Memory Area, of a CDRW Pressurized Mating Adapter, for docking a Space Shuttle to the International Space Station...

began. First, the Shuttle SRMSS (CanadaArm) was used to remove Pressurized Mating Adapter 2 (PMA 2) from Unity node's forward port to make room for the...

assembly flight that brought the Z1 truss, Control Moment Gyros, Pressurized Mating Adapter-3 (PMA-3) (mounted on a Spacelab pallet) and two DDCU (Heat pipes)...

Pressurized Mating Adapter-3 on the port side of Tranquility will be moved to the zenith port of the Harmony module, above Pressurized Mating Adapter-2...

dock to the forward port of Harmony, requiring relocation of Pressurized Mating Adapter (PMA-2) to any other ports on ISS like Harmony nadir. Axiom Space...