Antenna (radio) (section Impedance matching) problem is matching the remaining resistive impedance to the characteristic impedance of the transmission line: A general impedance matching network (an... 82 KB (10,868 words) - 03:17, 19 March 2024 |
Nominal impedance, approximate designed impedance Impedance matching, the adjustment of input impedance and output impedance Mechanical impedance, a measure... 1 KB (195 words) - 12:33, 22 January 2023 |
Standing wave ratio (section Impedance matching) (SWR) is a measure of impedance matching of loads to the characteristic impedance of a transmission line or waveguide. Impedance mismatches result in standing... 31 KB (4,435 words) - 05:26, 10 February 2024 |
Antenna tuner (section High-impedance feedline) Its purpose is to optimize power transfer by matching the impedance of the radio to the signal impedance on the feedline to the antenna. Various alternate... 167 KB (21,378 words) - 23:01, 2 May 2024 |
Waveguide (section Impedance matching) properly converted into electrical terms (current and impedance for example).: 14 Impedance matching is important when components of an electric circuit... 29 KB (3,483 words) - 18:59, 25 February 2024 |
Antenna feed (section Impedance matching) just consists of an impedance matching circuit (if needed) between the antenna and transmitter or receiver, which matches the impedance of the antenna to... 21 KB (2,832 words) - 11:08, 8 January 2024 |
Crystal radio (section Impedance matching) to the earphone is impedance matching. The maximum power is transferred from one part of a circuit to another when the impedance of one circuit is the... 81 KB (8,565 words) - 14:37, 9 April 2024 |
approaches zero. Using a large ratio is called impedance bridging. A related concept is reflectionless impedance matching. In radio frequency transmission lines... 15 KB (2,371 words) - 04:54, 22 October 2023 |