ISO 965 (ISO general purpose metric screw thread—tolerances) is an International Organization for Standardization (ISO) standard for metric screw thread... 7 KB (286 words) - 11:02, 15 March 2023 |
Tolerances ISO 965-1: Principles and basic data ISO 965-2: Limits of sizes for general purpose external and internal screw threads. ISO 965-3: Deviations... 17 KB (1,591 words) - 17:04, 13 January 2024 |
diameter and pitch combinations must adhere to ISO 261 and ISO 262 and the thread tolerances must adhere to ISO 965 parts 1, 2, and 4. Part 1 does not specify... 6 KB (655 words) - 22:03, 28 January 2024 |
ISO 2015 is a standard of the International Organization for Standardization (ISO), superseded by ISO standard ISO 8601. The standard ISO week numbering... 1 KB (111 words) - 10:32, 27 February 2023 |
parts: ISO 6344-1:1998: Grain size distribution test ISO 6344-2:1998: Determination of grain size distribution of macrogrits P12 to P220 ISO 6344-3:1998:... 682 bytes (64 words) - 10:45, 10 January 2024 |
ISO 10160 is the ISO standard, first published in 1993, that defines the terminology that is used for interlibrary loan transactions between various document... 830 bytes (59 words) - 08:36, 7 May 2022 |
ISO 7027:1999 is an ISO standard for water quality that enables the determination of turbidity. The ISO 7027 technique is used to determine the concentration... 784 bytes (77 words) - 10:10, 26 March 2024 |
1992) is the ISO standard describing the International System of Units (SI). The ISO 1000:1992 standard was withdrawn in 2009 together with ISO 31, and are... 1 KB (91 words) - 05:21, 7 May 2022 |