British Standard Pipe (BSP) is a set of technical standards for screw threads that has been adopted internationally for interconnecting and sealing pipes...

National Standard Pipe Thread standards, often called national pipe thread standards for short, are United States national technical standards for screw...

British Standard Whitworth (BSW) is an imperial-unit-based screw thread standard, devised and specified by Joseph Whitworth in 1841 and later adopted as...

Unified Thread Standard (UTS) defines a standard thread form and series—along with allowances, tolerances, and designations—for screw threads commonly...

A threaded pipe is a pipe with screw-threaded ends for assembly. The threaded pipes used in some plumbing installations for the delivery of gases or liquids...

often incorrectly called National Pipe Size, due to confusion with the American standard for pipe threads, "national pipe straight", which also abbreviates...

variant; used for other purposes as well British Standard Pipe Taper (BSPT) British Association screw threads (BA), primarily electronic/electrical, moving...

of a screw thread. Standard values include: Bhandari 2007, p. 203. Knuckle Thread DIN 405 Knuckle Thread DIN 20400 Bornemann Knuckle thread Bhandari 2007...

Association screw threads (BA) British Standard Cycle (BSC) British standard fine thread (BSF) British standard pipe thread (BSP) British Standard Whitworth (BSW)...

only difference is Komatsu uses millimeter thread sizes while JIS use a BSP (British Standard Pipe) thread. JIC fitting systems have three components...