Rolled homogeneous armour (RHA) is a type of vehicle armour made of a single steel composition hot-rolled to improve its material characteristics, as...

core goes on to penetrate the armour. The penetration of the L15 APDS is approximately 355 mm of rolled homogeneous armour at 1000 m. During penetration...

turret, unlike traditional cast ones, fabricated using steel rolled homogeneous armour (RHA). Work on the welded turrets of Obiekt 187, Obiekt 188 (T-90)...

barriers Linothorax Powered exoskeleton Rolled homogeneous armour Commercial uses of armor "Definition of armour in English". Oxford Dictionaries. Archived...

the main armour could withstand much greater hits. Due to lack of materials, German industry eventually switched to Rolled Homogeneous Armour (RHA), which...

details of the armour remain a secret, it has been described as being made by sandwiching composite panels between rolled homogeneous armour (RHA). The number...

self-defence. The Panzer III Ausf. A through C had 15 mm (0.59 in) of rolled homogeneous armour on all sides with 10 mm (0.39 in) on the top and 5 mm (0.20 in)...

researched which include buckypaper, and aluminium foam armour plates. Rolled homogeneous armour is strong, hard, and tough (does not shatter when struck...

RPG-43 had a penetration of around 75 millimetres (3.0 in) of rolled homogeneous armour at a 90 degree angle. Later in the war, it was improved and became...

Refleks can penetrate about 950 millimetres (37 in) of steel rolled homogeneous armour (RHA) and can also engage low-flying air targets such as helicopters...