A leading-edge extension (LEX) is a small extension to an aircraft wing surface, forward of the leading edge. The primary reason for adding an extension...
7 KB (879 words) - 22:48, 13 May 2024
leading-edge cuff is a wing leading-edge modification, usually a lightly drooped outboard leading-edge extension. In most cases of outboard leading-edge...
13 KB (1,756 words) - 03:27, 17 June 2023
one or more of the following: Leading edge boots Leading edge cuffs Leading edge extensions Leading edge slats Leading edge slots Krueger flaps Stall strips...
4 KB (455 words) - 22:28, 8 April 2024
A slat is an aerodynamic surface on the leading edge of the wing of a fixed-wing aircraft. When retracted, the slat lies flush with the rest of the wing...
11 KB (1,378 words) - 15:12, 18 April 2024
High-lift device (section Leading edge root extensions)
include wing flaps and slats. Fixed devices include leading-edge slots, leading edge root extensions, and boundary layer control systems. The size and lifting...
9 KB (1,240 words) - 16:01, 11 October 2023
Leading edge may also refer to: Leading edge cuff, a fixed aerodynamic device employed on fixed-wing aircraft to modify the airfoil Leading-edge extension, a...
2 KB (326 words) - 09:17, 29 October 2023
longer than it is wide, in contrast to a winglet or a moustache. Leading edge root extensions (LERX) are also sometimes referred to as wing strakes. On both...
5 KB (645 words) - 16:16, 11 October 2023
Dog's-tooth violet, a plant in the lily family Dogtooth extension, a type of leading-edge extension on the wing of an aircraft Dog teeth, locking features...
847 bytes (147 words) - 09:44, 23 December 2023
and the air intake is more usually called a leading edge root extension (LERX) or leading-edge extension (LEX). Large chines along the forward fuselage...
6 KB (757 words) - 04:09, 24 April 2024
sharply-swept leading edge at the root; the moderately-swept wing with a leading-edge extension, which is known as a hybrid wing; and the sharp-edge forebody...
7 KB (881 words) - 16:47, 15 January 2024