Safran Helicopter Engines (redirect from Turboméca)
Safran Helicopter Engines, previously known as Turbomeca, is a French manufacturer of low- and medium-power gas turbine turboshaft engines for helicopters...
19 KB (1,744 words) - 19:30, 7 August 2023
The Turbomeca Astazou is a highly successful series of turboprop and turboshaft engines, first run in 1957. The original version weighed 110 kg (243 lb)...
10 KB (965 words) - 00:44, 15 June 2023
Rolls-Royce Turbomeca Limited (RRTM) is a joint venture between British aero-engine manufacturer Rolls-Royce plc (UK) and French helicopter engine specialist...
8 KB (757 words) - 21:59, 28 December 2021
The Turbomeca Arrius is one of a family of turboshaft engines for helicopter use, first produced in 1981. As of 2012, some 2,700 units had been sold....
4 KB (272 words) - 00:00, 25 May 2023
The Turbomeca Arriel is a series of French turboshaft engines that first ran in 1974. Delivering 650 to 1,000 hp (480 to 750 kW), over 12,000 Arriel engines...
5 KB (343 words) - 16:02, 12 January 2024
The Rolls-Royce Turbomeca Adour is a two-shaft low bypass turbofan aircraft engine developed by Rolls-Royce Turbomeca Limited, a joint venture between...
10 KB (1,004 words) - 09:26, 24 December 2023
The Turbomeca Makila is a family of French turboshaft engines for helicopter use, first run in 1976 and flown in 1977. Typical power output is around...
5 KB (291 words) - 15:11, 11 February 2024
The Turbomeca Marboré is a small turbojet engine that was produced by Turbomeca from the 1950s into the 1970s. The most popular uses of this engine were...
7 KB (679 words) - 11:05, 28 April 2024
The Turbomeca Palas is a diminutive centrifugal flow turbojet engine used to power light aircraft. An enlargement of the Turbomeca Piméné, the Palas was...
4 KB (358 words) - 00:15, 1 December 2022
MTU Turbomeca Rolls-Royce GmbH (MTR) is a multinational engine manufacturer established to develop, manufacture, and service the MTR390 turboshaft engine...
7 KB (650 words) - 10:18, 2 April 2024