Congressional district

Congressional districts, also known as electoral districts in other nations, are divisions of a larger administrative region that represent the population of a region in the larger congressional body. Countries with congressional districts include the United States, the Philippines, and Japan.

Terminology

[edit]

Terminology for congressional districts vary by nations. The term "congressional district" is largely used in the United States and is distinctive from legislative districts. In the United States, congressional districts were inscribed into the Constitution to ensure representation based on population. Conversely, state legislation declares that "legislative representation be (built upon) non-population related principles such as representation of counties, cities, or other geographical and political unit".[1]

Apportionment and delimitation

[edit]

Apportionment

[edit]

Apportionment is the process by which seats in a congressional body are allocated amongst constituencies entitled to representation such that each district receives seats in proportion to its population.[2] Apportionment aims to fairly represent all voters through a principle of proportionality; however this is often difficult as proportions can be fractions whilst seats cannot be, and governments may be unable to quantify the precise number of actual voters.[3]

Delimitation

[edit]

Delimitation or redistricting is the process of drawing congressional boundaries and can also refer to the demarcation of voting areas for the purpose of assigning voters to polling places.[4] Delimiting is a common process in nations with first-past-the-post systems, two-round systems, alternative vote, block vote, parallel and mixed-member proportional systems and single-member districts. Nations without these processes typically have proportional representation electoral systems, such as Chile, Honduras, Norway, Spain, and many others.[5] The methodological framework that governs these processes is integral in administering fair and sovereign judicial systems for nations with delimitation processes. Manipulation of this framework often results in gerrymandering, the practice of drawing district boundaries to achieve political advantage for legislators.[6]

Japan

[edit]

Philippines

[edit]

There are currently 243 congressional districts in the Philippines. Voting representatives are elected from these districts to the lower house of the Congress of the Philippines every three years. In 1946 there were originally 98 congressional districts, this number increased to 200 after the 1987 constitution was created and new redistricting articles were mandated [7]

Apportionment in the Philippines

[edit]

The Philippines constitution mandates a nationwide reapportionment of setting boundaries for legislative districts; however, the legislature has not approved a reapportionment bill since 1987.[8] Following the ‘one person, one vote’ doctrine, political territories are expected to be symmetric and have limited variance in the size of its constituencies. However, many new districts have been created that defy the basic requisites for redistricting as the constitution fails to clearly expound the due process for apportionment and redistricting.[9] This has resulted in unequal representation in districts such as Calacoon City, and Batanes being represented by one legislator each, despite containing populations of 1.2 million and 17 000 people respectively.

Philippine's 243 congressional districts are composed of territories within provinces, cities and municipalities. From an American perspective, provinces are equivalent to states, and below that is the city/municipality which is equivalent to a city/town in the United States. Provinces are represented by governors and can be split into multiple congressional districts, each of which elects a congressman. Provincial governors allocate resources and control patronage in municipalities across all congressional districts in the province, thus have greater exposure and power than a representative from a single district.[10]

Delimitation in the Philippines

[edit]

There has been no official delimitation process in the Philippines since the 1987 constitution's ratification.[11] As per Article 6 of the constitution, the requisites for creation of a legislative district are as follows:

  • Should comprise territories that are practicably contiguous, compact and adjacent.
  • Contiguous territory of at least 2,000 square kilometres, as certified by the Lands Management Bureau.
  • A population of at least 250,000 inhabitants as certified by the National Statistics office.

Since 1987, 43 districts have been newly added due to the creation of new cities and provinces, sundering from existing provinces, and piecemeal redistricting. As incumbents control the institutions that determine the rules for redistricting, many of the congressional districts are allegedly gerrymandered to ensure the elite persistence of select families that form the Philippines' political dynasties.[12][13] This is illustrated by the Marcos family which remained in power from 1987 to 2008 in almost 50 congressional districts, despite term limits.[14]

United States

[edit]

Congressional districts are the 435 regions from which voting representatives are elected to the U.S. House of Representatives. After the decennial census population counts and apportionment of congressional seats, states are required to define and delineate their own congressional districts for the purpose of electing members to the House of Representatives. Each congressional district is expected to be equal in population to all other congressional districts in a state.[15] The boundaries and numbers shown for the congressional districts are established by their respective state's constitution or court orders in the apportionment and redistricting cycle.[16]

Apportionment

[edit]

Apportionment in the United States involves dividing the 435 voting seats every ten years. As per Article One of the United States Constitution, elections to the House of Representatives are held every two years, and the numbers of delegates are apportioned amongst the states according to their relative populations.[17] The Constitution itself makes no mention of districts.

The U.S. Constitution does not specify how apportionment is to be conducted and multiple methods have been developed and utilized since the Article's inception such as the Jefferson, Hamilton and Webster methods. The Jefferson method was first utilized in 1792 after the first decennial census was conducted in 1790 but was abandoned in 1840 as it favoured larger states such as Virginia, Thomas Jefferson's home state and the most influential state at the time.[18] Hamilton's method was used intermittently for the next half-century and was eventually replaced by Webster's as the Hamilton method resulted in population paradoxes when the House size increased.[19] After the House size and number of congressional districts were fixed in 1941, the Huntington-Hill method became the official method of apportionment and was used in the 2020 apportionment and redistricting cycle.[20] The current method solves many of the issues concerning previous methods, however it still violates the 'one person, one vote' rule established in Wesberry v. Sanders (1964) due to systematic bias which gives more representation and power to small states than to residents of large states.[21]

These methods have been the subject of debate for over 200 years as losing or gaining a seat affects representation which is the source of political power. Congressional districts are subject to the Equal Protection Clause and it is expected that they apportion congressional districts closer to mathematical equality than state legislative districts.[22] The U.S Supreme Court in Karcher v. Daggett (1983) rejected New Jersey's congressional redistricting plans due to a deviation of less than 1%.

Delimitation

[edit]

Many other nations assign independent bodies to oversee and mandate the delimitation of boundaries; however, in some nations the legislature manages this process. In the United States, legislatures play a commanding role in the redistricting (as delimitation is referred to in the United States) of congressional districts. The redrawing of boundaries occurs after the decennial census; single-member constituencies are responsible for the election of the legislators that govern this process.[23] In 25 states the state legislature is responsible for creating the redistricting plan, but six states (Alaska, Delaware, North Dakota, South Dakota, Vermont and Wyoming) do not require redistricting for the House of Representatives and instead elect a single representative for the entire state.[24] Each state has its own constitution and laws surrounding the redistricting process, and most of the modern criteria applied federally have come about through rulings by the U.S. Supreme Court.[25]

Prior to 1962, there was limited federal and state government regulation on redistricting, and these were rarely enforced. However, after the Baker v. Carr (1962) decision redistricting became justiciable and courts became an active participant in the redistricting process of congressional districts as the decision allowed voters to challenge redistricting plans.[26] Since Shaw v. Reno (1993) and Abrams v. Johnson (1997), the courts have invalidated numerous congressional redistricting plans upon the basis of traditional districting principles. These decisions have been surrounded in controversy as the Supreme Court has not identified these 'traditional' criteria explicitly, resulting in the major political parties attempting to abuse the lack of legislation and definition to advantage their respective parties.[27] According to the database of redistricting laws in all fifty states and previous court decisions, the de facto principles are: compactness, contiguity, equal population, and preserving county and city boundaries.[2]

See also

[edit]

References

[edit]
  1. ^ Altman, M.1998. Traditional Districting Principles: Judicial Myths vs. Reality. Social Science History, 22(2), 117-139.)
  2. ^ a b "About Congressional Apportionment". Census.gov. Retrieved 2023-12-19.
  3. ^ Kohler, Ulrich; Zeh, Janina. "Apportionment Methods". The Stata Journal: Promoting communications on statistics and Stata. 12 (3): 375–392. doi:10.1177/1536867X1201200303. ISSN 1536-867X.
  4. ^ Mcdonald, M. (2004). A Comparative Analysis of Redistricting Institutions in the United States, 2001-02. State Politics & Policy Quarterly, 4(4), 371-395.
  5. ^ Handley, L., Grace, J., Schrott, P., Boneo, H., Johnston, R., & Maley, M. et al. (2006). Delimitation Equity Project. International Foundation for Electoral Systems.
  6. ^ Tausanovitch & Root, 2020
  7. ^ Querubin, Pablo (2010) ”Family and Politics: Dynastic Persistence in the Philippines”, mimeo, Massachusetts Institute of Technology
  8. ^ Bickerstaff, S. Election systems and gerrymandering worldwide (p. 112). Springer.
  9. ^ Miraflor, James Matthew (2019-02-03). "How should we be represented in Philippine Congress?". Medium. Retrieved 2023-12-19.
  10. ^ Thompson, M. (2016). Southeast Asia's Subversive Voters A Philippine Perspective. Philippine Studies: Historical & Ethnographic Viewpoints, 64(2), 265-287. Retrieved November 26, 2020, from http://www.jstor.org/stable/26621963
  11. ^ Bickerstaff, S. Election systems and gerrymandering worldwide (p. 112). Springer.
  12. ^ Abramowitz, Alan (1991) ”Incumbency, Campaign Spending and the Decline of Competition in U.S. Elections”, Journal of Politics, 53(1): 34-56.
  13. ^ Querubin, Pablo. (2011). Political Reform and Elite Persistence: Term Limits and Political Dynasties in the Philippines. Harvard Academy for International and Area Studies.
  14. ^ Acemoglu, Daron and James A. Robinson (2008) “Persistence of Power, Elites, and Institutions”, American Economic Review, 98(1), March.
  15. ^ "Redistricting Criteria". www.ncsl.org. Retrieved 2023-12-19.
  16. ^ "About Congressional Districts". Census.gov. Retrieved 2023-12-19.
  17. ^ U.S.Const. art.I, §.2
  18. ^ Balinski, M., & Young, H. (1983). Apportioning the United States House of Representatives. Interfaces, 13(4), 35-43.
  19. ^ Kohler, U., & Zeh, J. (2012). Apportionment methods. The Stata Journal, 12(3), 375-392. doi: https://journals.sagepub.com/doi/pdf/10.1177/1536867X12012003032
  20. ^ "Apportioning Representatives in the United States Congress - Hill's Method of Apportionment | Mathematical Association of America". www.maa.org. Retrieved 2023-12-19.
  21. ^ Balinski, M., & Young, H. (2002). Fair Representation: Meeting the Ideal of One Man, One Vote (2nd ed.). Washington: Brookings Institution Press.
  22. ^ Handley, L., & Grofman, B. (2014). Redistricting in comparative perspective. Oxford: Oxford University Press.
  23. ^ Gelman, A., King, G. (1994). Enhancing democracy through legislative redistricting. The American Political Science Review, 88, 541-559.
  24. ^ Whitaker, L. (2015). Congressional Redistricting and the Voting Rights Act: A Legal Overview [Ebook] (1st ed., pp. 3-12). Congressional Research Service.
  25. ^ "Redistricting and the Supreme Court: The Most Significant Cases", 2020
  26. ^ Altman, Micah; McDonald, Michael (2012-01-01). "Redistricting Principles for the Twenty-First Century". Case Western Reserve Law Review. 62 (4): 1179. ISSN 0008-7262.
  27. ^ Bowen, D. (2014). Boundaries, redistricting criteria and representation in the U.S. House of Representatives. American Politics Research, 42(5), 856–895.